Mounting the speedlite – Canon 380EX User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
2. Mounting the Speedlite
1
Loosen the locking collar by turning
it as shown by the arrow.
Slip the Speedlite’s mounting foot
on the camera’s hot shoe until it
stops.
Turn the locking collar as shown by
the arrow and tighten. (The
mounting foot’s locking pin extends
into the hot shoe.)
• To detach the Speedlite, turn the locking
collar in the opposite direction until it
stops. (The locking pin retracts into the
mounting foot.)
Although the hot shoe on the EOS 650, EOS 620, EOS 750, and EOS 050 does
not have a locking pin hole, Speedlite 380EX can still be mounted on these
cameras.
12
Advertising