Canon 380EX - Manual (Page 22)

r
II. Speedlite 3B0EX with Type-A Cameras
(2) Flash with Shutter Speed-Priority AE
When you want to create a certain effect with the shutter speed, use
shutter speed-priority AE. In this mode, you set the sync speed anywhere
from 30 sec. to the camera’s maximum sync speed. The camera then
sets the aperture automaticaliy to obtain the correct background
exposure. The E-TTL auto fiash system controls the flash output
according to the aperture set automatically by the camera.
liS S.S
H Set the camera to Tv (shutter
* speed-priority AE) and set the sync
speed anywhere from 30 sec. to
the camera’s max. sync speed.
Check that the FP flash switch is
set to the green dot (normal sync).
O Press the shutter button halfway to
focus the subject.
A Check that nothing is blinking in
^ the viewfinder and press the
shutter button completely to take
the picture.
0 lf the aperture setting blinks, the background wiii be overexposed or
underexposed. Change the sync speed untii the aperture setting stops biinking
and stays on.
22