Power switch 4. fp flash switch, Set the power switch as follows, Use this switch to set high speed sync – Canon 380EX User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. Power Switch
4. FP Flash Switch
Set the power switch as
follows:
0 :To turn off the power.
1 :To turn on the power. If the
Speedlite is left unused for about
90 sec., it turns off automatically to
save battery power. To turn on the
Speedlite again, press the shutter
button or press the test firing
button.
Use this switch to set high
speed sync.
• : For normal sync,
: For high-speed sync.
When Speedlite 380EX is used with a Type-A camera and the switch Is set for high-speed
sync, using a shutter speed faster than the camera's maximum sync speed sets the high
speed sync mode and using a shutter speed slower than the maximum sync speed sets the
normal sync mode.
When a Type-B camera Is used, normal sync mode Is set regardless of this switch's setting.
13