Mounting and detaching a lens, Mounting a lens, Remove the caps – Canon EOS 300 D User Manual
Page 23: Attach the lens, On the lens, set the focus mode, Switch to <af, Remove the front lens cap, Detaching the lens, On the lens, set the focus mode switch to <af
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mounting and Detaching a Lens
Mounting a Lens
EF-S Lens mo
r ---------------------
{ -
7—7
unt index
EF Lens mount index
3
Remove the caps.
• Remove the rear lens cap and the
body cap by turning them as shown by
the arrow.
Attach the lens.
• Align the EF-S lens with the camera’s
white EF-S lens mount index and turn
the lens as shown by the arrow until it
clicks in place.
© When attaching a lens other than an
EF-S lens, align the lens with the red
EF lens index mark.
On the lens, set the focus mode
switch to <AF>.
• If the focus mode switch is set to
<MF>,
autofocus will not operate.
^ Remove the front lens cap.
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
o Turn the lens until it stops, then detach
it.
O
The EF-S lens is dedicated to this camera. It cannot be attached to
other EOS cameras.
23