Replacing the date/time battery, Set the power switch to < off, Open the cover and remove the battery – Canon EOS 300 D User Manual
Page 33: Take out the battery holder, Replace the battery in the battery holder, Close the cover, Replacing the date/time, Battery
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replacing the Date/Time Battery
The date/time battery maintains the camera’s date and time. The
battery’s service life is about 5 years. When the date/time battery’s
power is low, T
bC” will appear on the LCD panel. Replace the battery
with a new CR2016 lithium battery as described below.
The date/time setting will also be reset, so you must set the
correct date/time.
Set the Power switch to < OFF >.
Open the cover and remove the
battery.
Take out the battery holder.
Replace the battery in the battery
holder.
, V © Be sure the battery’s orientation (+ -)
^ is correct.
Close the cover.
O
For the date/time battery, be sure to use a CR2016 lithium battery.
33