Canon IXUS Z65 - Manual (Page 18)

Ц] Turning the Power On
Slide the main switch to ON.
^ The lens cover opens and the lens
and Nash are set for shooting.
■ If you slide the switch to OFF, the
lens and flash both retract, the lens
cover closes and the camera
switches off
Take care not to obstruct the lens or flash with your fingers.
0
When you switch the camera off, the display on the
LCD panel does not disappear,
E Checking the Battery Power
Check that the battery icon appears on the LCD
panel when you switch the camera on.
ea (on) The battery is fully charged.
C3 (on) Prepare a new battery.
-'eia - (blinking) Install the new battery. (^ 15)
A new battery generally has sufficient capacity for
eight 25-exposure film cartridges (based on
Canon's Standard Test Method with normal
temperatures and with the flash used for 50% of
shots). At low temperatures (-10°C/14°F), the battery
capacity is approximately one third of normal capacity.
• Use one CR2 lithium battery.
• Always check the battery capacity before using the
camera.
• If you are traveling or intend to take many pictures,
take a supply of spare batteries The batteries may be
difficult to obtain at your destination.
• If you take a number of consecutive shots using the
flash, the battery power may drop off temporarily and
prevent the LCD panel from displaying data correctly
If this occurs, switch the camera off and wait a few
minutes before switching it on again
11-18
Ш