Changing the flash mode, Select the flash mode, B-27 – Canon IXUS Z65 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
%<§>
Changing the Flash Mode
You can switch the flash off or set it to fire each time you
take a picture. Select the mode that best suits your subject
and your surroundings.
• The (V) and <§>(V) settings can be stored in the camera’s
memory, Initially, the camera is set so that the flash mode is (V)
when you switch the camera on However, if you switch the
camera off while the flash mode is set to ^(V). that setting is
stored in the camera’s memory and the flash mode will begin from
^(V) when you switch the camera back on
• You can use the CF2 custom function setting to specify that
whichever flash mode is active when you switch off the camera
should be stored in the camera's memory (-> 44)
Select the flash mode.
• Each time you press the
%■<§>
button, the flash mode changes
to the next setting in the cycle
shown below
(^) Auto Flash (-» 28)
The i Icon blinks only wh»t€ the flash is recharging it
stops blinking when the flesh has finished recharging
Auto Flash with Red-eye Reduction (-» 29)
2
I
}t Flash ON (forced flash) ( 3 f )
g
1
® Flash OFF (suppressed (lash) (-> 32)
1
Slow-synchro (ntghffime portrait) (—> 33)
_____ I
B-27