Realtime release photography, Set the focus, Take the picture – Canon IXUS Z65 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Realtime Release Photography
• To use this mode, set the custom function CF1 to 1. (-> 44)
1
Set the focus.
• Position the AF frame over
the subject and press the
shutter button down
halfway.
^ The camera makes a brief
whirring sound
^The green indicator lights
when the subject is in
focus.
• Keep the shutter button
pressed down halfway
Take the picture.
• When the photo opportunity
arrives, press the shutter
button down fully.
^ The shutter is released
immediately.
•
• If you press the shutter button all the way down in a
single movement, realtime release does not operate.
• Take care that the distance from the camera to the
subject does not change. If the distance does change,
start again from step 1.
• Take care not to touch the lens as this may result in
the picture being out of focus
•The <§>(V) 3nd
modes use red-eye reduction
and should not be used, as the shutter cannot be
released immediately.
• The Focus Lock function can be used in the same
way as for normal photography.
0-46