Qt running lock – Canon 514XL-S User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Jack. One frame will be wasted if you reverse
the order.
*
Single frame shooting is used for the purpose of
showing changes which take a long time in a
much shorter period of time, or when doing
animations. The shooting time and the number
of frames have to be calculated beforehand. If
there is a flower that blooms in one hour and
you want to show it in 5 seconds, 18 frames
times 5, that is 90, is the number of frames to
be taken. Then the shooting time is divided by
the number of frames 90, and each frame is
taken at that interval. If the interval is less than
60 seconds, the Interval T-imer E can be used
instead of the Remote Switch.
*
Be careful not to use the microphone switch
for single frame shooting. It can prevent correct
film transport.
QT Running Lock
^ M he running lock is for-shooting continuously
by locking the shutter release lever. Press the
shutter lever to shoot, and then rotate the main
switch to the left all the way to "RL”. And it is
locked at the release position when your finger is
taken off the shutter release lever. Return the
switch to "R" position to release the lock. This