Canon 514XL-S User Manual

Page 59

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Both are activated at the first step of the shutter

release so monitoring is possible without filming.

Earphone Monitor: After installing the ear­

phone in its jack, pull the shutter release lever

to the first step and listen. Adjust the micro­

phone position for best sound with the least

possible noise.

Recording

Level

indication:

The recording level

in the viewfinder should vary in intensity, with

changes in incoming sound. If it glows con­
tinuously, the sound input is too loud. Set the

Audio Level Dial to the low level setting and
lock it. Be sure to monitor through the ear­

phone in noisy background. In loud surround­

ings the earphone monitor may not be audible.

Then,rely on the visual recording level monitor.

6

Shooting

The shooting is performed at the second step of

the shutter release lever. Direct sound recording is

perfectly synchronized. It is important to decide the

shooting time according to the subject recorded.

Essential sounds especially, such as a conversations,

explanations or announcements must be recorded

longer since they cannot be cut in the middle.

Advertising