Canon 514XL-S User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ю
Remote Control with the Microphone
Switch
The switch on the microphone enables sound
filming by remote control. Switch the microphone
“OFF", connect it to the camera and set the shutter
release lever of the camera to "RL" position.
When the microphone is switched "ON", sound
filming begins. If the earphone is connected then,
you can monitor the sound with the microphone
switch at "OFF"
* For sound filming controlled by the remote
control with the microphone switch, determine
the composition and insert the finder cover
before filming.
* The photographer himself can be in the film. If
the cord of the microphone is not long enough,
use the Microphone Extension Cord E450L.
* You can confirm filming by checking the cue
light.
* Switch on quietly to avoid click noise.
Л
Disconnecting the Remote Control with
the Microphone
After filming, release the running lock to
prevent battery waste. Before disconnecting, first
release the main switch from "RL' position. If the
microphone is disconnected first, it will start the
film transport and waste film.