Using the electronic dials – Canon EOS 3 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operation
(1) Halfway pressing
When the shutter button is pressed
halfway, autofocusing (AF) is activated
to
focus
the
subject.
Autoexposure
(AE) metering is also turned on to set
the correct shutter speed and aperture
which is displayed in the viewfinder
and on the LCD panel for (5)6).
(2) Complete pressing
This releases the shutter and takes the
picture. After the frame is exposed, the
camera
advances
the
film
automatically.
Using the Electronic Dials
There are three ways to use the
dial;
1. Press and hold down a button and turn the
dial while looking
at the LCD panel. When the button is released, you can take a picture.
® Hold down a button...
then turn the <^S.>.
17