Installing, Battery – Canon EOS 3 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Installing the Battery and Checking the Battery Level
The battery is housed in the camera grip. Remove the grip to install one
2CR5 lithium battery.
Installing
the
Battery
1
Loosen the grip screw by turning it
OO oh/^\A/n in
counterclockwise as shown in the
figure.
2
Slide the grip downward to remove.
^ Insert the battery so that its
^ contacts touch the grip’s contacts
at the bottom.
M
After inserting the battery, turn the
^ battery as shown by the arrow in
the figure.
• To take out the battery, slide the battery
release lever.
Reattach the grip to the camera,
^ then turn the grip screw to tighten
securely.
Lithium batteries may not be available in certain areas. Carry a spare battery when
going on a trip or when you will use many rolls of film.
21