Basic operation – Canon EOS 3 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. After pressing a button, turn the
dial.
When a button is pressed, its function turns on for 6 or 16 seconds.
You then look at the LCD panel and turn the
dial during this
time. After the function turns off or when the shutter button is pressed
halfway again, the camera will be ready to take a picture.
Buttons which turn on for 6 or 16 seconds are indicated in these
Instructions with the following icons:
(5)6): The button’s function remains active for 6 seconds after the button is released.
(516): The button’s function remains active for 16 seconds after the button is released.
Basic Operation
® After a button
is pressed...
Turn the
3. Just turn the
dial.
While looking at the LCD panel, you can set the shutter speed,
aperture, or another setting.
18