Basic operation – Canon EOS 3 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operation
To reset the camera to the default
settings:
4 Open the side door and press the
■ <CLEAR> button. This resets the
camera to the default settings
shown in the table below.
Shooting mode
P
AF mode
One-Shot AF
Metering mode
Evaluative
Film advance mode
Single
Focusing point selection
Automatic
Multiple exposures
Canceled
Exposure compensation
0
Flash exposure
compensation
0
AE lock
Canceled
FE lock
Canceled
AEB
Canceled
Custom Functions
Settings retained
• When the camera is reset, the
shooting
mode
will
be
set
automatically to Program AE <P>
(page 29).
To reset all Custom Functions (except
CF-0 described on page 105) to the
default settings, follow the step below:
^ Open the side door, press the
dr^.
<QF> button, then press the
< CLEAR> button.
20