Canon AF 35 J User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
This camera is designed to automatical
ly set film speed by sensing the DX code
marked on the film cassette, so you
don’t have to set It. The use of DX code
negative film is therefore strongly
recommended. The camera uses ISO
100 or ISO 400 film speeds.
(When using slide film, use ISO 100 or
400 film.)
• When film without a DX code is us
ed, the camera will automatically set
the film speed to ISO 100, so in that
case use ISO 100 film.
Film passing through X-ray examina
tions at airports, even when loaded
in a camera, may be exposed and
ruined. To avoid accidental exposure,
tell the inspector you want your
camera and film hand checked.
14-