Canon AS 6 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
4.
After the exposure is complete, always
return the flash switch to OFF. Leaving the
flash on wastes battery energy.
If the shutter button is pressed halfway down
after the flash-ready lamp has lighted, the
red viewfinder lamp will blink, but the expo
sure will still be correct
Do not press the shutter button before the
flash-ready lamp has come on or the picture
will be underexposed (dark)
The flash-ready lamp will not light up if you
are holding the shutter button halfway down.
24
Advertising