Canon AS 6 User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5.
Close the back cover and fasten it with
the buckle ®
6
.
Reopen the back cover and inspect the
packing to make sure that it is properly
sealed.
When washing the 0-ring or packing, do not
use soap and do not rub or stretch it After
washing, dry it by pressing lightly with a
clean, dry cloth. Never use a dryer or other
heat source.
If the 0-ring or packing have been used for
more than two years, replace them with new
ones regardless of whether they have any
scratches. If the camera is used often in
sand, dust, or underwater, yearly replacement
is recommended
New 0-ring and packing can be purchased
at a Canon Service Facility.