Care of o-ring and packing – Canon AS 6 User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
3
(^15. Care of O-ring and Packing
-0-ring
1. Remove the battery magazine ®, then
slide the tip of a slender round stick Into
the 0-rlng removal slot and take out the
0-rlng.
2.
Inspect the 0-rlng. If it is scratched, re
place it; if it is dirty, clean it in running
water.
I NEVER use a sharp object such as a nail, scls-
I
sors, or a needle. These will damage the 0-rlng,
Instead use something soft, like the rounded end
of a toothpick, and remove the 0-ring carefully.
39
Advertising