Wireless selector – Canon Speedlite 420EX User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
![background image](/manuals/633271/13/background.png)
Wireless Selector
The wireless selector has the following settings.
For Normal Flash Operation
• Set the wireless selector to OFF to
use the 420EX as a normal, on-
camera Speedlite.
For Wireless Flash Operation
• Set the wireless selector to SLAVE to
use the 420EX as a wireless slave
unit.
■■ The flash coverage is set to 24mm
automatically.
Q • Even if the wireless selector is accidentally set to <SLAVE>, the 420EX will still
operate as an on-camera Speedlite for normal flash photography.
13
Advertising