Filming speeds and projection effects – Canon SCOOPIC 16 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Filming Speeds and Projection Effects
Film shot at filming speeds other than 24 frames
per second will have varying effects when pro
jected,
I
When shooting at high filming speeds of 48
or 32 frames per second, the projected pictures
will have a slow-motion effect. For example,
when a film is shot at 48 frames per second
and then projected at a standard 24 frames per
second, the projecting time will be lengthened
by two times, thereby slowing down the speed
of motion by one-half. High filming speed is,
thus, very effective when slowing down fast
moving subjects or when analyzing movements.
Exposure time is also speeded up and is, there
fore, effective for eliminating blurring during
panning,
2
When shooting at slow filming speed of 16
frames per second, the opposite effect of high
filming speed is obtained. In other words, by
dropping the filming speed the projected pictures
will have a fast-motion effect. This method is
used when stressing the movement of a subject.