Canon SCOOPIC 16 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
in Press the shutter release button, while press-
I U
ing the film guide release pin (the film guide
is in open condition), and check to see that the
top and bottom film loops are uniform. About
one second, or 10 to 15cm, of film feed is suffi
cient.
n
Put the side cover back on, turn the film side
cover latch and flip it down.
4 The film holder on the take-up sprocket must
be at the correct position in order to close the side
cover properly.
Advertising