CLIFFORD 420.4X - Manual (Page 28)

25 © 2011 Directed Electronics. All rights reserved.
Remote and System Operations
Passive Locking*
Park and exit the vehicle, after the doors are closed the Passive locking
countdown begins. The led flashes quickly and upon reaching 20 sec-
onds then the horn honks once. At 30 seconds the system locks itself.
Anytime before the system locks you can re-enter the vehicle or
open the trunk to load or unload items and, after closing passive lock-
ing resumes.
To stay secure in case of accidental unlocking of the system, if a
door is not opened within 30 seconds the system relocks the doors.
Auto Re-locking*
Auto re-locking ensures the vehicle stays protected if it is not entered
after unlocking by remote control. After unlocking by remote, the doors
automatically lock, if programmed on, in 30 seconds. Open any point
of entry to stop the re-lock until the next unlock by remote.
Onetime Bypass*
Turn the ignition On for one to three seconds and then Off. The horn
honks once to confirm one-time bypass is enabled.
One-time bypass can be used to temporarily bypass the Passive
lock-
ing operation for one cycle. It also bypasses the comfort closure and
auxiliary channel outputs if programmed to activate when locking.
After the next unlock, all operations return to normal.
* The optional horn honk feature must be installed.