CLIFFORD 420.4X - Manual (Page 30)

27 © 2011 Directed Electronics. All rights reserved.
Car Select
Car 2 remote control option must first be turned On (See Remote Con-
trol Configuration section to turn on).
1. Press and hold the button for 3 seconds. The LED flashes once
or twice to indicate the selected Car is 1 or 2.
2. Release the button for Car Select or continue to hold for program-
ming.
3. Release the button, then press and release while the LED
flashes continue to perform Car Select. Once the car is selected
a command can be performed by pressing one of the command
buttons.