CLIFFORD 420.4X - Manual (Page 33)

30 © 2011 Directed Electronics. All rights reserved.
s Turn Paging off: The remote will not wake up to check for mes-
sages with Paging off in the Setup Remote menu.
s Turn Beeps off: The Button beeps can be turned off in the Setup
Remote menu. The command beeps still play normally.
Battery Replacement
Battery
Tray
Latch
Side View Rear View
1 2
+
1. Using a small flat narrow object,
push latch down towards battery
tray while gently prying the tray out-
wards from both ends until released.
Remove the tray from the remote con-
trol housing.
2. While observing the correct
polarity, replace the old battery with
a new one. Seat battery flush into tray and slide back into housing
until securely latched. The remote control is now ready for use.
* The optional horn honk feature must be installed. If confirmation honks
are programmed off, the system will still emit one honk as an alert when
unlocking.
Battery Disposal
Directed Electronics cares about the environment. If you
need to dispose of the battery, please do so in accordance
with your municipal requirements for battery disposal or re-
turn to Directed Electronics at: One Viper way, Vista, CA
92081 (Shipping and/or handling costs are the sole responsibility of
the owner/sender and will not be covered by Directed Electronics).