AVer EVC900 - Manual (Page 48)

45
Keypad Tone
Keypad Tone allows you to enable/disable tone sounds when you are dialing a number using the
remote controller.
Select General Setting│System Settings and
press .
Select the Keypad Tone check box to enable
the tone sounds. By default, this function is
enabled.
Administrator
Change Admin. Password
Select General Setting │ Administrator and
press .
Here allows you to change Admin. Password.
[Note] The password is for WebTool loggin
only.
Save System Log
If you encounter unknown issues and are unsure of how to troubleshoot the unit, sending us the
saved system log data to help us solve your problem faster.
Insert a USB Flash drive into the USB Port(on front panel)) of the EVC main system.