AVer EVC900 - Manual (Page 6)

3
Installation
Getting Familiar With the EVC -Series
EVC includes Main System, MIC, Camera and Remote Controller.
Main System
Front Panel:
Name Function
(1) LED Indicator Show you the status of your LAN connection.
1. Solid Green: LAN connection is successfully
2. Flash Green: Data transmission is processing through the LAN
connection.
(2) POWER Button Press this button to turn on/off main system. Red: power off; Blue: power
on
(3) & (4) USB Port Use to connect the USB storage for system log saving and FW upgrade.
Back Panel:
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
(12)
Name Function
(1) LAN Port Use the RJ-45 Ethernet cable to connect an IP-based network to the LAN
port.
(2) CAMERA IN Port Connect the camera to the main system via a camera cable.
(3) MIC IN Port Receive audio signal from MIC device via a mini din 8 pin MIC cable.
(4) DVI IN Port Using the DVI to HDMI connector to transfer the DVI to HDMI interface and
through the HDMI cable connects to the PC or NB.
(5) VGA IN Port Connect the VGA cable to the VGA input port located on the back panel, and
connect the other end of VGA cable to a VGA input source (ex. Document
camera, Laptop or Desktop) to input video signal.