AVer EVC900 - Manual (Page 49)

46
Select
“Save” located next to “Save System
Log” to save the system log into your USB
Flash drive.
After the file is saved, select
“OK”. Remove
the USB Flash drive and insert it into your
compu
ter’s USB port. Located the file
message.tar.gz and send it to the technical
support team.
Firmware Update Notice
Select this function check box to enable
firmware updated notice function. By default,
this function is enabled.
Far End Camera Control
Select the “Far End Camera Control” check
box to enable the far site to control your
camera. By default, this function is enabled.
Wake-On-LAN (WOL)
Wake-on-LAN is an Ethernet computer
networking standard that allows your computer
to be turned on or awakened by a network
message. By default, this function is disabled.