AVer EVC900 - Manual (Page 87)

84
2.
Press “ ” -> “Network”.
3.
Press “LAN Configuration”.
4. And In the drop- down list “Obtain IP address”,
choos e “Static IP” or “DHCP”.
- Static IP: I
nput the “IP address”, “Subnet
Mask” and “Default Gateway”.
- DHCP: Configure the system to
automatically obtain an IP address from the
DHCP server.
5. Select “Apply” and press (Enter).
6. Press (Back) on the remote to return to
previous menu. (If you have H.323 ALG enabled,
skip to step 10).
7. In the same page, go to “Firewall” and press
(Enter).
8. Select “ON” in the NAT check box and enter the
IP address in the “NAT Public (WAN) address”
field.
9. Press t
he “Home” button on the remote to return
the home menu.
10. Press the Call button on the remote and
you are ready to make your first call.