CASO Germany FonDue Set (2280, 2282) - Manual (Page 42)

caso Vario Power 3400 42
E07
Overheating Protection
Eliminate the course of overheating. Once the cooktop has cooled, the
appliance can be put into operation again. If error messages continue to
be displayed after an extended waiting period or after restarting the
appliance, then it must be sent to Customer Service to be examined.
E08 Temperature sensor malfunction
Please send the device to our customer service.
Please note
► If error messages continue to be displayed after an extended waiting period or after
restarting the appliance, then it must be sent to Customer Service to be examined.
16.3 Causes and rectification of faults
The following table assists in localizing and rectifying minor faults.
Fault Possible Cause To Rectify
Display is empty Power plug not plugged in
► Insert plug into mains socket
Fuse switch not switched on
► Switch on fuse switch
Please note
► If you are unable to solve the problem with the steps shown above, please contact
Customer Service.
17 Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials. However,
they also contain damaging substances, which were necessary for their
functionality and safety.
If these were put in the non-recyclable waste or were handled incorrectly, they
could be detrimental to human health and the environment. Therefore, do not put
your old device into the non-recyclable waste under any circumstances.
Please note
► Utilise the collection point, established in your town, to return and recycle old electric
and electronic devices. If necessary, contact your town hall, local refuse collection
service or your dealer for information.
► Ensure that your old device is stored safely away from children until it is taken away.