CASO Germany MCDG 25 master - Manual (Page 56)

caso MCDG 25 Master (black) 56
13.4 Opening / closing door
 Open door
Push the door opener to open the door of the device. If the device is switched on, the
current cooking programme will be interrupted.
Please note
► Leave the door open for a moment before reaching into the cooking chamber, to allow
the accumulated heat to escape.
 Close doors
Close the door until the door latch audibly locks in place. If a current cooking
programme was interrupted as a result of opening the door, the current
cooking programme will be continued after pressing the button Start/Quick
Start.
13.5 Switch on/off sound
Press the button Power/sound for three seconds in order to switch on or off
the sound (beep tone). You can hear messages of the programme ending
and warning signals even if the sound has been switched off.
13.6 Activation after selecting the programme
After selecting the program, press the Start/Quick start button, to start
the preset cooking programme.
13.7 Quick start
Utilise this function to programme the oven for comfortable cooking at 100%
microwave performance.
Press the Start/Quick start button in quick sequence to set the cooking time.
The maximum cooking time is 10 minutes. If you press the button
Start/Quick start once, the oven will work for 30 sec., if you press it twice, it
works for 1 min. The oven starts automatically after 2 seconds.
Once the end of the cooking time is reached, four signal tones will be emitted
and END will appear in the display.
13.8 De-activation:
In order to interrupt an ongoing cooking programme, you can proceed as follows:
Pres the Stop button once. The cooking programme that is in use will be
Stopped.
Open the door of the device. The cooking programme that is in use will be
Stopped.
Please note
►
To continue the interrupted cooking program, press the button
Start/Quick start after closing the door.