CASO Germany MCDG 25 master - Manual (Page 57)

caso MCDG 25 Master (black) 57
To terminate the interrupted program, press the button Stop a second time.
Please note
►
Before beginning a different cooking process you must delete the
display and reset the system by pressing the button Stop.
13.9 Setting the clock
To set the clock on the device, proceed as follows:
 Activating setup mode
Press the button Time/Weight.
Press the button once again to switch the oven from the 24 hour system to the 12 hour
system.
 Setting the hours
Turn the control dial Time/Menu until the correct hour is displayed.
Press the Time/Weight button to save the set hour.
 Setting the minutes
Turn the control dial Time/Menu until the correct minute is displayed.
Press the Time/Weight button to save the set time.
13.10 “Microwave” mode
While microwaving you can adapt the power setting and the cooking time (maximum 95
minutes).
 Adjusting the Power Setting
Select the desired power setting by pressing the Power/sound button as
often as necessary to get the setting you want (see table below).
 Setting the cooking time
Set the cooking time by turning the Time/Menu control dial.
 Starting the cooking programme
After selecting the program, press the button Start/Quick Start, to start the
preset cooking programme.
 End of the cooking programme
Once the end of cooking timer is reached, four signal tones will be emitted and END will
appear in the display.