Catler JE 4010 - Manual (Page 13)

11
DISASSEMBLING YOUR JE 4010 JUICE EXTRACTOR
DISASSEMBLING YOUR JE 4010 JUICE EXTRACTOR
Step 1
Ensure the JE 4010 Juice Extractor is turned
off by pressing the ‘On/Off ’ switch on the
control panel to ‘Off ’. Then switch the
appliance off at the power outlet and unplug
the cord.
Step 2
Remove the pulp container by tilting the
base away from the motor base, then unlatch
it from under the juicer cover and the
container support extending from under the
motor base.
Step 3
Use the grip handle located on the safety
locking arm to lift the locking arm from the
juicer cover and lower down out of position.
Step 4
Lift the juicer cover off the JE 4010 Juice
Extractor.
Step 5
Remove the fi lter bowl surround with the
stainless steel fi lter basket still in place.
Step 6
To remove the stainless steel fi lter basket
from the fi lter bowl surround, insert fi ngers
under the grooves marked ‘LIFT BASKET’ and
lift the fi lter basket up. For easy cleaning, it
is recommended to remove the fi lter basket
over the sink.
THE STAINLESS STEEL FILTER BASKET CONTAINS SMALL SHARP BLADES TO CUT
AND PROCESS FRUITS AND VEGETABLES. AVOID TOUCHING BLADES WHEN
HANDLING THE FILTER BASKET.