Catler FP 4010 - Manual (Page 18)

18
TO DETACH THE GEARBOX FROM THE LID
• To remove the gearbox grasp the
gearbox and lift up from the processing
lid.
RECOMMENDATIONS WHEN USING
THE STICK MIXER WITH THE FOOD
PROCESSING BOWL
• Do not operate the stick mixer when the
food processing bowl is empty.
• The bottom of the food processing bowl
features a anti-slip rubber rim. This keeps
the food processing bowl stable, however
it is recommended during processing to
hold the motor body with one hand and
the food processing bowl and lid with the
other.
• When processing, cut food into uniform
sizes to ensure quicker, even and more
consistent results.
• The stick mixer blends foods and
liquids rapidly, therefore it is easy to
over process. Remember to check food
throughout the operation.
When using the shredding or slicing disc do
not allow the processing bowl to fi ll with food
beyond the MAX level indicated. Processing
food beyond this level could damage parts
of the bowl and lid
NOTE
CAUTION:
DO NOT process hard foods such as
coff ee, grains or chocolate in lumps,
as damage to the blade may result.
DO NOT process boiling or hot foods
in the food processing bowl.
NEVER remove the blade from the
bowl before food processing
is completed.
Processing hard spices will cause the
chopper bowl to become cloudy over
time. Hard spices are best suited to
a spice grinder with a metal bowl.
ASSEMBLY OF THE POTATO MASHER LEG
Before fi rst use
Remove any packaging material and
promotional labels. Wash blade and two
parts of the mashing leg before use.
CAUTION:
Never immerse the motor body or
gearbox in water or any other liquid.
If the variable masher leg is already assembled
start from step 3.
NOTE
ASSEMBLY & OPERATION