Catler FP 4010 - Manual (Page 25)

25
TROUBLESHOOTING
TROUBLESHOOTING
PROBLEM SOLUTION
Blades don’t turn when
processing. • May be too much food in bowl. Reduce quantity.
• Pieces of food, such as meat are too large.
Reduce size.
Unable to lock lid into place. • Spindle may be out of position. Remove lid,
straighten spindle as vertical as possible and
reposition lid.
• Food may be stuck underneath the quad blade
preventing the lid from being locked into place.
Food such as nuts can be loaded through the
feed chute.
Gear box in lid jumps out of lid
when processing. • Replace gear box and ensure that the control
grip is held vertically and fi rmly.
Masher leg won’t attach onto
masher drive. • Ensure mashing leg and gear box arrow
graphics are vertically aligned. Twist masher leg
anticlockwise to lock for use.
Blades won’t remove from
potato masher. • Mashing leg must be assembled to gearbox
and motor body to remove blade. Rotate blade
clockwise to remove.
Grating disc slows down when
grating. • Grating has exceeded Max level. Empty bowl
and continue to grate.
• Too much force is being used when grating.
Reduce force when pushing.
Processing bowl does not sit fl at
onto storage base. • Ensure adjustable slicing disc is set to ‘Storage
Position’.
Motor sounds like it is not
coping with processing load. • Speed may not be correct. Refer to processing
guide for correct speeds.