Catler FP 4010 - Manual (Page 6)

6
CATLER RECOMMENDS SAFETY FIRST
 Before you connect the
appliance into the power
outlet make sure the
voltage on the rating label
corresponds to the voltage
in your power outlet.
 Always make sure the
appliance is completely and
properly assembled before
operating, mainly the blending
leg. Follow the instructions in
the manual.
 Ensure the appliance is turned
off and the power is switched
off at the power outlet before
attempting to assemble or
disassemble.
 Do not run the appliance
unless it is correctly and
properly assembled. Do not
run an empty appliance.
Incorrect using of the
appliance can negatively
infl uence its life.
 Handle the appliance and
the accessories with care –
remember the blades are very
sharp and should be kept out
of reach of children.
 Never use the appliance to
process food on a hot stove or
gas burner. Always remove the
saucepan from the heat source
and ensure the power cord
and the appliance are also kept
away from any heat source.
 Use the appliance as described
in this manual.
 Use the whisk attachment
only for the recipes which
require the whisk attachment
usage. Do not use the whisk
attachment any other
purposes than it is intended
for.
 Do not process hot or boiling
liquids in the chopper / mixing
bowl. Allow liquids to cool
before placing into the bowl.
 Insert only food for mixing into
the chopper / mixing bowl.
 Allow the hot food to cool
down to the temperature
of 60°C at least.
 Do not operate the appliance
continuously for more than
1 minute. After 1 minute, turn
off the appliance and allow the
motor to rest for 1 minute at
least.