Catler BL 8011 - Manual (Page 5)

4
CATLER RECOMMENDS SAFETY FIRST
CATLER RECOMMENDS SAFETY FIRST
We at Catler are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions:
IMPORTANT SAFEGUARDS FOR YOUR BLENDER BL 8011
READ ALL INSTRUCTIONS BEFORE USE
AND SAVE FOR FUTURE REFERENCE.
•
Carefully read all instructions before
operating the device for the fi rst time and
save for future reference.
• Remove any packaging material and
promotional stickers before using the
device for the fi rst time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fi tted to the power plug
of this appliance.
• Do not place the blender near the edge
of a bench or table during operation.
Ensure that the surface is level, clean and
free of water, fl our, etc. Vibration during
operation may cause the appliance to
move.
• Do not place the blender on or near a hot
gas or electric burner, or where it could
touch a heated oven.
• Always ensure the blender is properly
assembled before use. Refer to
Assembling and operating your blender
BL 8011 chapter.
• Use only the blender jug and lid supplied
with the blender.
• Always ensure the blender lid is fi rmly
positioned on the blender jug before
operating.
• Do not leave the blender unattended
when in use.
• Always ensure the blender is turned off
by pressing the ‘Power’ button on the
control panel. Then switch the appliance
off at the power outlet and unplug
the cord. Make sure the motor and
blades have completely stopped before
attempting to move the appliance, or
when the blender is not in use and before
disassembling, cleaning and storing.
• Do not operate the appliance
continuously with heavy loads for more
than 10 seconds. Allow the motor to rest
for 1 minute between each use.
• None of the recipes in this instruction
book are considered a heavy load.
• If food becomes lodged around the
blending blade, turn the blender off by
pressing the power button on the
control panel. Then switch the appliance
off at the power outlet and unplug
the cord. Make sure the motor and
blades have completely stopped before
removing the jug from the motor base.
Use a spatula to dislodge or stir the food
before continuing. Do not use fi ngers as
the blades are sharp.
• Keep hands, fi ngers, hair, clothing as
well as spatulas and other utensils away
from the blender jug during operation.
Never place your fi ngers, hands or
utensils inside the blender jug without
unplugging the appliance from the
power outlet.
• Be careful when handling the jug as the
blades are very sharp. Be careful when
emptying the blender jug and during
cleaning. Mishandling of the blades may
cause injury.
• Do not remove the blender jug from the
motor base while in operation.
• Do not use the blender for anything other
than food and/or beverage preparation.
• Do not operate the blender without food
or liquid in the blender jug.