BoonDocker HONDA CRF: 450 - Manual (Page 5)

Revised 2/28/2014 Page 5 of ?
www.boondockers.com………………..... ……….………………....877-522-7805
19. Zip tie boost solenoid to the oil feed line
above intercooler. 20. Trim right fender to assure proper fitment
around turbo and muffler. NOTE: you have to
leave the tab part on the fender to ensure the side
panel to fit correct.
21. Trim left side panel to fix around actuator
and bracket. (Inside View) 22. Route feed line through hole in the fender to
the feed line fitting on the top of the turbo.
23. Once you have the seat, tank and panels in-
stalled start the bike to check if oil is coming out
of the oil feed line, turn off bike and finish in-
stalling the line. 24.