BoonDocker POLARIS RZR XP 900 Turbo System - Manual (Page 10)

Revised 7/9/2013 Page 10 of 17
www.boondockers.com………………..... ……….………………....877-522-7805
43. INSTALLING THE INTERCOOLER
Mount the fan to the intercooler using the 3
provided bolts. Note the longer bolt will need to
be used on the raised fan mounting tab. 44. Install the 3 silicone hoses and clamps to the
intercooler. Do not tighten the clamps until the
intercooler is installed, this way you can find the
best angle to access the clamp.
45. Install the grommets and spacers used from
the factory airbox onto the intercooler mounting
bracket. 46. Slide the intercooler onto the throttle bodies
and the outlet on the compressor housing of the
turbo. Tighten the clamps connecting the
intercooler to the throttle bodies.
47. Fasten the intercooler mounting bracket to
the stock airbox mounting bracket using the
stock bolts. 48. Tighten the clamps connecting the
intercooler to the turbo.