BoonDocker POLARIS RZR XP 900 Turbo System - Manual (Page 4)

Revised 7/9/2013 Page 4 of 17
www.boondockers.com………………..... ……….………………....877-522-7805
7. REMOVE SKIDPLATE Remove the 14
bolts and washers that fasten the skidplate to the
frame. 8. REMOVE SEATS AND REAR PANEL
Remove the seats from the vehicle and the rear
panel using a T 25 torx head bit.
9. REMOVE ENGINE HEAT SHIELD
Remove the 7 bolts holding the heat shield in
place, pull the heat shield down to remove it
from the vehicle. 10. DRAIN OIL Remove the factory drain plug
and set aside. We will not be reinstalling this
plug.
11. REMOVE MUFFLER MOUNT Using an
airsaw or hack saw, remove the passanger side
muffler mount to make room for the turbo inlet. 12. Cutting the bracket from the backside with an
airsaw is ideal. File any sharp edges.