BoonDocker POLARIS RZR XP 900 Turbo System - Manual (Page 5)

Revised 7/9/2013 Page 5 of 17
www.boondockers.com………………..... ……….………………....877-522-7805
13. PREPPING THE STOCK MUFFLER
BRACKET Remove the nuts from the lower
rear engine mount bolts. 14. Center the turbo mount template to the stock
muffler bracket as shown. Secure the template to
the vehicle with vise grips.
15. drill 2x 11/32” holes into the stock muffler
bracket as shown.
16. MOUNTING THE TURBO/BRACKET
Using the 2 5/16 x 3/4” bolts, fasten the turbo
bracket to the stock muffler bracket. Use the
11/32” holes drilled in the previous step.
17. Using the factory lower engine mounting
bolts, fasten the bottom of the turbo bracket to
the vehicle. 18. INSTALLING WATER LINES Follow
the factory coolant line from thethermistat lamp
each side of the 90 degree bend with vise grips.
Make a cut after the 90 degree bend.