Campbell Hausfeld PA208501 - Manual (Page 11)

11 Sp
Always
depressurize the
unit before removing any bowl or
personal injury and/or property
damage could occur.
1. Drain moisture from coalescing filter
before every use. To drain, turn drain
valve. Make sure system pressure is
10 psig or less.
2. The only other servicing required for
the air cleaner/dryer is replacement
of the desiccant when the desiccant
turns pink, and replacement of the
filter element when the service
indicator shows red.
3. Desiccant Replacement
a. Shut off air flow to the air
cleaner/dryer and depressurize
system.
b. Remove bowl from the dryer
housing by pushing the bowl
toward the body and rotating bowl
counterclockwise. Pull bowl down
to remove from housing.
2
c. Pour out used desiccant.
d. Pour new desiccant into bowl,
filling to within 1/2” of the top of
the bowl. Do not allow desiccant to
get into center tube.
e. Reinstall bowl on housing. Be sure
it is securely locked in place before
pressurizing the unit.
4. Coalescing Filter Replacement - The
service indicator on the coalescing
filter (shown in Figure 1) signals
when the filter element needs to be
replaced. When the indicator turns
red the filter element must be
replaced. Use replacement filter
element PA2087.
a. Shut off air flow to the air
cleaner/dryer and depressurize
system.
b. Remove bowl from from the dryer
housing by pushing the bowl
toward the body and rotating bowl
counterclockwise. Pull bowl down
to remove from housing.
c. Remove used filter element by
grasping the bottom of filter
element and turning
counterclockwise.
d. Install new filter element making
sure o-ring is properly seated in
groove. Always handle the element
by the bottom of filter element. Do
not touch the foam plastic cover.
Pressure on the outer foam cover
can damage it once it is in service.
e. Filter elements cannot be cleaned.
A new filter element must be used.
Reinstall bowl on housing. Be sure
it is securely locked in place before
pressurizing the unit.
Technical Service
For information regarding the
operation or repair of this product,
please call 1-800-543-6400 between 8
a.m. and noon or between 1 p.m. and
5 p.m. (EST), Monday through Friday
for assistance. If you are calling from
Ohio or outside the continental United
States, please call collect, 1-513-367-
1182.
www.campbellhausfeld.com
Air Cleaner / Dryer Model PA208501
Maintenance
Limited Warranty
1. DURATION: From the date of purchase by the original purchaser as follows: Standard Duty Products - One Year, Serious Duty Products -
Two Years, Extreme Duty Products - Three Years.
2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030,
Telephone: (800) 543-6400
3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the Campbell Hausfeld
product.
4. WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: Any Campbell Hausfeld nailer, stapler, air tool, spray gun, inflator or air
accessory supplied or manufactured by Warrantor.
5. WHAT IS COVERED UNDER THIS WARRANTY: Substantial defects in material and workmanship which occur within the duration of the
warranty period.
6. WHAT IS NOT COVERED UNDER THIS WARRANTY:
A. Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED FROM THE DATE
OF ORIGINAL PURCHASE AS STATED IN THE DURATION. If this product is used for commercial, industrial or rental purposes, the
warranty will apply for ninety (90) days from the date of purchase. Some States do not allow limitation on how long an implied
warranty lasts, so the above limitations may not apply to you.
B. ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE,
OR MALFUNCTION OF THE CAMPBELL HAUSFELD PRODUCT. Some States do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
C. Any failure that results from an accident, purchaser’s abuse, neglect or failure to operate products in accordance with instructions
provided in the owner’s manual(s) supplied with product. Accident, purchaser's abuse, neglect or failure to operate products in
accordance with instructions shall also include the removal or alteration of any safety devices. If such safety devices are removed
or altered, this warranty is void.
D. Normal adjustments which are explained in the owner’s manual(s) provided with the product.
E. Items or service that are normally required to maintain the product, i.e. o-rings, springs, bumpers, debris shields, driver blades,
fuses, batteries, gaskets, packings or seals, fluid nozzles, needles, sandblast nozzles, lubricants, material hoses, filter elements,
motor vanes, abrasives, blades, cut-off wheels, chisels, chisel retainers, cutters, collets, chucks, rivet jaws, screw driver bits, sanding
pads, back-up pads or any other expendable part not specifically listed. These items will only be covered for ninety (90) days from
date of original purchase. Underlined items have warranty for defects in material and workmanship only.
7. RESPONSIBILITIES OF WARRANTOR UNDER THIS WARRANTY: Repair or replace, at Warrantor’s option, products or components which
are defective, have malfunctioned and/or failed to conform within duration of the warranty period.
8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY:
A.
Provide dated proof of purchase and maintenance records.
B. Deliver or ship the Campbell Hausfeld product or component to the nearest Campbell Hausfeld Authorized Service Center. Freight
costs, if any, must be borne by the purchaser.
C. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
9. WHEN WARRANTOR WILL PERFORM REPAIR OR REPLACEMENT UNDER THIS WARRANTY:
A. Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending
on the availability of replacement parts.
B. If the purchaser does not receive satisfactory results from the Authorized Service Center, the purchaser should contact Campbell
Hausfeld (see paragraph 2).
This Limited Warranty applies in the U.S. and Canada only and gives you specific legal rights. You may also have other rights which vary
from state to state or country to country.
Purificador de Aire / Secador Modelo PA208501
MATERIALES DAÑINOS PARA EL PLASTICO POLICARBONATO (LISTA PARCIAL)
MARCAS DE PRODUCTOS DAÑIMOS PARA EL PLASTICO POLICARBONATO*
No
desco-
necte el envase del filtro de la cubierta
a menos que necesite reemplazar
alguna pieza. Si lo utiliza sin la cubierta
podría ocasionarle heridas y las
garantías y responsabilidades civiles
del fabricante quedarían canceladas.
¡NUNCA OPERE EL SISTEMA SIN LA
CUBIERTA DEL ENVASE DEL FILTRO!
! ADVERTENCIA El envase
de esta
unidad está hecho de plástico
policarbonato. No permita la presencia
de materiales cáusticos en el sistema de
suministro de aire. No opere la unidad
con piezas rotas o deterioradas. Limpie
el envase con un trapo limpio y seco o
reemplácelo cuando sea necesario.
! ADVERTENCIA
Acetaldehído
Ácido acético (concentrado)
Acetona
Acrylonitrilo
Amoniaco
Floruro de amonio
Hidróxido de amonio
Sulfuro de amonio
Adhesivos & selladores anaeróbicos
Anticongelantes
Benceno
Ácido benzoico
Alcohol bencílico
Fluídos para frenos
Bromobenceno
Ácido butírico
Ácido carbólico
Disulfuro de carbón
Tetracloruro de carbón
Solución cáustica de potasa
Solución cáustica de sodio
Clorobenceno Cloroformo
Creosol
Ciclohexanol
Ciclohexanona
Ciclohexeno
Formamida de dimetila
Dioxano
Tetracloruro de etano
Acetato de etilo
Éter etílico
Etilaminas
Clorhidrina etilénica
Dicloruro etilénico
Etilenoglicol
Ácido fórmico (concentrado)
Freón (refrig. & propel.)
Gasolina (muy aromática)
Hidracine
Ácido hidroclorhídrico (concentrado)
Thinner para lacas
Alcohol metílico
Cloruro de metileno Metileno salicílico
CaOH
Ácido nítrico (concentrado)
Nitrobenceno
Lacas Nitrocelulosas
Fenol
Cloruro hidróxido de fósforo
Tricloruro de fósforo
Ácido fopiónico
Piridina
Hidróxido de sodio
Sulfuro de sodio
Estireno
Ácido sulfúrico (concentrado)
Cloruro de azufre
Tetrahidronaftalina
Tiofena
Tolueno
Terpentina
Xileno
Percloretileno y otros
Atlas "Perma-Guard"
Buna N
Cellulube #150 y #220
Cemento Crylex #5
* Eastman 910
Garlock #98403 (poliuretano)
Haskel #568-023
Hilgard Co.'s hil phene
Aceite Houghton & Co. #1120, #1130 y #1055
Houtosafe 1000
Kano Kroil
Aceite penetrante Keystone #2
*Loctite 271 *Loctite 290
*Loctite 601
*Sellador de teflón Loctite
Aceite Marvel Mystery
Minn Rubber 366Y
National Compound #N11
"Nylock" VC-3
Parco #1306 Neoprene
*Permabond 910
Petron PD287
Prestone
Pydraul AC
Aceite regular para motores marca Sears
Sinclair oil "Lily White" Stauffer Chemical FYRQUEL #150
Stillman #SR 269-75 (poliuretano)
Stillman #SR 513-70 (neoprene)
Tannergas
Telar
Aceites Tenneco andrerol #495 & #500
Titon
*Vibra-tite
Zerex
*En forma líquida sin procesar.
Algunos
aceites
para compresores, químicos, productos
para limpieza doméstica, solventes,
pinturas y vapores, pueden dañarlos
envases plásticos y ocasionar que fallen.
No use dichos materiales en el sistema
de suministro ni sus alrededores.Es
imposible suministrarle una lista
completa de todos los materiales
dañinos para el plástico. Comuníquese
con las compañías Mobay Chemical o
General Electric para recibir más
información sobre los productos dañinos
para el plástico policarbonato.
! ADVERTENCIA Modelos Resistentes y Modelos Robustos