Clarity ALERTMASTER AL10 - Manual (Page 10)

E
N
G
L
I
S
H
Operations
c. To return to 5 PM activation, press the SET TIMER
button once for two seconds or more. To confirm
this setting, the clock will blink twice every five seconds.
d. If you are home and want to turn off the SET
TIMER for the evening, press LAMP CONTROL for
more than two seconds. The timer will resume normal
operation the next evening.
2. To turn off the SECURITY TIMER, press TIMER ON / OFF
once.
E. Nightlight
Slide the NIGHTLIGHT switch to the ON position to engage the AL10
nightlight. When the switch is turned to the ON position, the oval ring
around the LAMP CONTROL button lights up. The NIGHTLIGHT is
turned off by sliding the switch to OFF.
F. Dimmer
Press the DIMMER button on top of the console to adjust the clock
display brightness level.
G. Battery
The AlertMaster AL10 operates on 10 “AA” size rechargeable NiMH
batteries (not included) during a power outage.
DO NOT USE REGULAR ALKALINE BATTERIES!
Operations
Power is provided for the console and the pillow shaker, but not for the
connected lamp.
The doorbell transmitter operates on one “23A” size battery (included).
It normally lasts 8-16 months and can be tested by watching the red
power indicator illuminate when the doorbell button is pressed. If the
power indicator is faint or off, replace the battery.
Remove doorbell from wall plate.
Screw off the back cover
of the doorbell body.
Install battery.
Screw on the back cover
of the doorbell body.
Attach the doorbell body
to the mounting plate.
1
2
3
4
5
Do not burn or puncture the batteries. Like other batteries of this type,
if they are burned or punctured, they could release toxic material which
could cause injury. Do not dispose of batteries in household garbage. For
information about recycling or proper disposal, consult your local solid
waste (garbage) collection or disposal organization.
17 18