Clarity ALERTMASTER AL10 - Manual (Page 7)

E
N
G
L
I
S
H
Operations
2. DOOR
The door indicator light and sidebar lights illuminate when the doorbell
button is pressed. The lamp will turn on for five seconds, off for two
seconds, on again for two seconds and repeat until two minutes have
passed; the bed shaker will also vibrate while the lamp flashes. This
function is also activated when a signal is received from the optional
Door Announcer (Model AMDX).
AlertMaster
PHONE
CLOCK
ALARM
DOOR
SOUND
MOTION
3. CLOCK / PAGING
The clock indicator light and sidebar lights illuminate when the alarm
clock is activated. The bed shaker will vibrate and the lamp will turn on
for two seconds, off for one second, and repeat for one hour or until the
SNOOZE button is pushed.
Operations
AlertMaster
PHONE
CLOCK
ALARM
DOOR
SOUND
MOTION
Alarm / Snooze
When the alarm clock activates, the bed shaker will vibrate and the lamp
will flash for one hour, or until the SNOOZE or RESET / PAGE
button is pushed. This stops the alarm clock and resets it for the same
time on the next day.
The “SNOOZE” time on the alarm is nine minutes.
Paging
When the RESET / PAGE button is pressed for just a moment, it
activates the base unit and any remote receivers or personal signalers
that are within an 80-foot range. They activate for one two-minute cycle.
This function is available only while the unit is in standby mode.
11 12