Clarity ALERTMASTER AL10 User Manual

Page 13

Advertising
background image

E

N
G

L

I

S

H

D. Audio Alarm Transmitter (AMAX™)

Place this next to any audio alarm for
notification when the alarm is activated.
It activates the Alarm function of the
AlertMaster system and has a range of up
to 80 feet.

Optional Accessories

E. Baby Sound Monitor (AMBX™)

Place this monitor near your infant, and it
will transmit a signal to the AlertMaster
system when your baby cries.

F. Door Announcer (AMDX™)

Place the Door Announcer next to your
existing doorbell, door chime, or intercom
announcer. It will transmit a signal activating
the Door function of the AlertMaster
system from up to 80 feet away. This option
is ideal for apartments, condos or suites
with a common security door or gate.

G. Motion Sensor (AMSX™)

Notifies user of unusual motion, such as the
presence of an intruder.

Important Information for Customers

PART 68 OF FCC RULES INFORMATION

This AL10 Notification System complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA. On the bottom of this
equipment is a label that contains, among other information, a product
identifier in the format US: AAAEQ##TXXXX. If requested, this number
must be provided to the telephone company.

A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA. A compliant telephone
cord and modular plug, RJ11 USOC, is provided with this product. It
is designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.

The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone company. For
products approved after July 23, 2001, the REN for this product is part
of the product identifier that has the format US: AAAEQ##TXXXX. The
digits represented by ## are the REN without a decimal point (e.g., 03 is
a REN of 0.3). For earlier products, the REN is separately shown on the
label.

If this telephone equipment causes harm to the telephone network,
the telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice isn’t
practical, the telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with
the FCC if you believe it is necessary.

Regulatory Compliance

23

24

Advertising