Dynojet 424xlc2: Pre-Installation Guide - Manual (Page 24)

Pre-Installation Guide for Model 224 and 424 Automotive Dynamometers
D Y N O P R E - I N S T A L L A T I O N I N F O R M A T I O N
In Ground Model 224xLC Dyno
16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IN GROUND MODEL 224XLC DYNO
The following specifications and requirements will help you set up your dyno area
and verify you have met the requirements necessary to operate your dyno safely.
P IT S PECIFICATIONS
Before proceeding, take a moment to look over the pit dimensions and requirements
for your in ground dyno. Refer to the pit dimensions (P/N 98219103) you received
from your salesman for more detailed specifications.
C HASSIS S PECIFICATIONS
description specifications
Length
of frame 218.44 cm (86.00 in.)
including eddy current brake 321.23 cm (126.47 in.)
including pit covers 381.00 cm (150.00 in.)
Height
to top of frame 58.42 cm (23.00 in.)
Width
of frame 73.66 cm (29.00 in.)
including feet 89.54 cm (35.25 in.)
including air brake 96.52 cm (38.00 in.)
frame with pit covers 144.78 cm (57.00 in.)
Weight
224 dyno/crated dyno 1588 kg (3500 lb.)/ 2087 kg (4600 lb.)
eddy current brake 635 kg (1400 lb.)
Drum
diameter 60.96 cm (24.00 in.)
width 205.74 cm (81.00 in.)
Frame structural steel plate and angle
Maximum Speed 322 kph (200 mph)
Maximum Axle Weight 1361 kg (3000 lb.)
Remote Switches remote software control