EFCO E-Lite - Manual (Page 13)

EFCO CORPORATION 6/2012 PART NO. YWLS Page 13 of 19
E-Lite Fabrication, Assembly and Installation Instructions
Section VIII: E-Lite “Module Built” Base Frame Assembly
Strut to internal base lead-point attachment screws
E-Lite Support Strut centerline to centerline
spacing is not to exceed 24” O.C.
Strut to internal base Tek attachment screws
Internal Base
Terminator Channel
Strut lead-point attachment screws
2. Assemble E-Lite Module Frame.
A.) Assemble components as shown into ladders, tighten all fasteners firmly.
Completed E-Lite Module Ladder
Notched Ends