ETS-Lindgren FP5080 Isotropic Electric Field Probe (Archived) - Manual (Page 33)

NiCd Battery Fast Charger
© ETS-LINDGREN L.P. – December 2004
REV B- PN H-600086
Ux
Set unit type. x = 1, 2, 3, or N (next unit)
1 = V/m
2 = mW/cm²
3 = [V/m]²
Vtx
Verify table data.
t = table (same table as for the Lx command,
above).
x = number of bytes to send in one string.
Z Zero.
Null
Send the ASCII null character. This is a special
command that can be used as the initial
command to the probe after it is powered up.
The probe responds with “N”.
Archived 4/02/10