0 specifications – ETS-Lindgren FP5080 Isotropic Electric Field Probe (Archived) User Manual

Page 47

Advertising
background image

NiCd Battery Fast Charger

© ETS-LINDGREN L.P. – December 2004

REV B- PN H-600086

4.0 Specifications

Power

Main:

IEC filtered AC power input module
110 - 240 Vac, 500 mA MAX., 50 - 100 Hz

Alternate:

Automobile cigarette lighter to 2mm power plug
adapter cord., 12.5 Vdc, 100 mA

Fuses:

250 Volt, 1.0 Amp, Type T (5 mm x 20 mm)

Output

Open

Circuit

Voltage:

15

Vdc

Fast Charge Pending Current:

60 mA

Fast

Charge

Current:

1400

mA

Pulsed Trickle Charge Current:

50 mA

Output Voltage (During Fast Charge):

3 - 6 Vdc

NiCd Battery:

3.6 Volt 3 Cell NiCd Battery, 1400 mAH (Rapid charge cells, 1.2
volts/cell); ETS-Lindgren Part #491038

Environmental

Operating temperature 10 to 40

{

C

Humidity:

5% to 95% relative humidity,
non-condensing

Power Cable

This charger is shipped with a three-wire power cable. When
this cable is connected to an appropriate AC power source, it
connects the chassis to earth ground. The type of power cable
shipped with each battery charger depends on the country of
destination.

Archived 4/02/10

Advertising