ETS-Lindgren HI-4455 Isotropic Field Probe (Archived) - Manual (Page 21)

HI-4455 Isotropic Electric Field Probe
© ETS-LINDGREN L.P. – August 2005
Revision D- Part No. H-600076 21
4. MAINTENANCE
This section explains which maintenance tasks can be performed by the
user. It also provides information regarding replacement and optional
parts. If you have any questions concerning probe maintenance, consult
ETS-Lindgren Customer Service.
MAINTENANCE RECOMMENDATIONS
Maintenance of the HI-4455 probe is limited to external components
such as cables or connectors.
Any calibration or maintenance task that requires probe disassembly
should be performed at the factory. Check with ETS-Lindgren Customer
Service (+1.512.531.6400) before opening the unit to avoid problems
with your probe's warranty.
NOTE: Opening the probe enclosure may void your
warranty. If your system is still under warranty, contact
ETS-Lindgren Customer Service before performing any
maintenance inside the probe.
UPGRADE POLICIES
Periodically, probes are upgraded to enhance functionality. These
upgrades are commonly announced through ETS-Lindgren Engineering
Bulletins.
RETURN PROCEDURES
To return a probe to ETS-Lindgren, use the following procedures:
Step 1. Briefly describe the problem in writing. Give details regarding
the observed symptom(s), and whether the problem is constant or
intermittent in nature. If you have talked previously to ETS-Lindgren
Customer Service about the problem, provide the date(s), the name of
the service representative you spoke with, and the nature of the
conversation. Include the serial number of the item being returned.
Archived 4/2/10